Home
Indkøbsvogn
Kontakt os
Hjælp
IC Skilte
Om os
Kundeservice: +45 35 108 109  
Søg: Avanceret søgning
Vælg sprog:
Kategorier Kategorier
Pictogrammer
Sikkerhedsskilte
Farligt gods
Efterlysende skilte
IMO Skilte - IMO Signs
Standardskilte
Naturstyrelsen
Handicapservice
Opsætningsmateriel
Afmærkning & Sikkerhed
Bumper Guards beskyttelsesprofiler
Tensator
Kataloger


Information Information
Info Pictogrammer
Info Sikkerhedsskilte
Info IMO signage


Hjælp Hjælp
Kontakt os
Fortrolighedserklæring
Salgs- & Leveringsbetingelser
Knowledge Base

Pictogramsalg DK :: Info IMO signage

Info IMO signage
SPHERE OF INFLUENCE OF A SIGN
The location of a sign requires careful consideration. Once in position its influence depends on: the size of the sign, the distance and angle of view, the height above the floor, the ambient light, any obstructions and the type of material used, i.e. photoluminescent or ordinary material. There are of course other factors - such as height of the viewer, sight impairment, smoke etc. An indication of how these factors affect the sphere of influence of a sign is illustrated below.
 
SIZE, DISTANCE AND LIGHT
 
ANGLE OF VIEW
 
Photoluminescent Sign & Tape Material Specifications

Self Adhesive Vinyl:
Flexible laminated PVC composite materiel incorporating a photoluminescent layer thermally welded to a white reflective layer. Backed with pre-applied adhesive.

Thickness: 0.6 mm
Indoor durability: in excess of 5 years
Outdoor durability: good, but can be reduced in strong sunlight and humidity.
Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead.
Chemical resistance: resistant to most common cleansing agents.
Flammability: inherently fire retardant.
Adhesive: cross-linked acrylic, pressure sensitive permanent adhesive with silicone release backing paper.
Luminance performance: in excess of 46 mdc/m2 @ 10 mins. and 4 mcd/m2 @ 60 mins. when tested in accordance with Din 67510 part 1.

Rigid PVC:
Laminated PVC sheet incorporating a photoluminescent layer backed by a rigid white reflective substrate and protected by a tough, clear gloss PVC film. All laminations are thermally welded to form a cohesive sheet.

Thickness: 1.1 mm
Indoor durability: in excess of 5 years
Outdoor durability: excellent, but can be reduced in strong sunlight.
Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead.
Chemical resistance: resistant to most common cleansing agents.
Flammability: inherently fire retardant.
Adhesive: cross-linked acrylic, pressure sensitive permanent adhesive with silicone release backing paper.
Luminance performance: in excess of 46 mdc/m2 @ 10 mins. and 4 mcd/m2 @ 60 mins. when tested in accordance with Din 67510 part 1.

 
Non-Photoluminescent Sign & Poster Material Specifications

Self Adhesive Vinyl:
Flexible gloss white vinyl material.

Thickness: 80-100 micron
Indoor durability: in excess of 3 years
Outdoor durability: approximately 2 years
Chemical resistance: no effect from oils, greases, aliphatic selvents, heptane and kerosene.
Flammability: self extinguishing
Adhesive: emulsion based, UV resistant, permanent adhesive with high initial tack and adhesion.
Gloss: 60 to ISO 2831, 20°, MD
Opasity: 90%

Rigid PVC:
Opaque rigid white gloss PVC materiel.
Thickness: 1 mm with UV stabilisation, and impact resistance > 650kJ/m2 to EN ISO 8256-A-3
Dimensional stability: 4% to DIN 53377 @ 140° C/10 mins.
Chemical resistance: no effect from oils, greases and most common solvents.
Cold wheather performance: 30° C tested to DIN 53372

 
Installation Procedures

Self adhesive products:
For satisfactory installation of self adhesive signs, posters and tapes, surfaces should be smooth, clean and dust and grease free. NB: self adhesive vinyl is not suitable for installation on emulsioned wall surfaces. Peel off the backing paper, align the item to ensure it is straight, and allow one edge to stick to the mounting surface. Work away from the centre of this edge gently smoothing the product into place with a wad of soft clean rag, ensuring no air bubbles are trapped.

Rigid signs:

Rigid signs can be drilled at each corner for mechanical fixing and suspension from the ceiling, or can be fixed in place using applied adhesives or double sided adhesive pads.

 
 
 
Vi er også... Vi er også...
Vores hovedside

Indkøbsvogn Indkøbsvogn
Indkøbsvogn er tom
 

Se indkøbsvogn
Checkout
Ordrehistorik


Brugerkonto Brugerkonto
Brugernavn

Password

Log in 
Registrer 
Glemt password ?

If Javascript is disabled in your browser click here


Nyhedsbrev Nyhedsbrev

Vi har idag lagt det nye katalog fra IC Safety til download på vores website.

Det drejer sig om følgende katalog:

IC Safety katalog 2012

Som altid er vores kataloger GRATIS og distribueres elektronisk.

Alle varer fra kataloget vil være at finde til on-line bestilling i løbet af den næste uge.


Tidligere nyheder

Din email:
Tilmeld 



Bruger(e) online:  99 uregistrerede kunder
Pictogrammer og Sikkerhedsskilte Handel på dette website er primært forbeholdt B2B, derfor er alle priser som udgangspunkt angivet excl. moms Copyright © 2009-2017 Pictogramsalg DK